Electronic voting machine using seven segment multiplexing with 8051 microcontroller (AT89C51) ABSTRACT :
This topic presents a basic approach to develop an electronic machine. The idea is to display the count of votes on a set of seven segment displays. A set of switches are provided through which a user can cast vote. After every cast of vote, the subsequent count can be seen on the seven segments. The segments and switches are controlled through AT89C51. For every candidate, a segment has been provided. Description :
This voting machine is designed for four candidates. The provision of casting vote has been provided by means of four tactile switches. These switches take manual inputs from the user and transfer them to the pins of controller. Based on these inputs, the vote count for different candidates is increased byAT89C51. To display the vote count, four seven segment displays are also connected to the microcontroller (refer seven segment interfacing with AT89C51). The count value for each candidate is sent to the corresponding segment. The four counts appear continuously by multiplexing these segments through AT89C51. Pins 2-5 of the port P3 are configured to take inputs through switches connected to them. The data pins of the seven segments are connected to port P2. Pins 0-3, of port P1, are configured as output to act as control/enable pins of the seven segments.
CIRCUIT DIAGRAM :
The design of simple electronics voting systems is very important to the area of applications we have presented. Thus a detail design of an embedded microprocessor system has been presented as demonstrated by the results obtained from the tests carried out. While the project has limitations, this provides an opportunity for expansion of the current project in future years. Our future work is to...
Please join StudyMode to read the full document